Slot drain system has opened up a new path for architectural design! The slot linear drainage system has good drainage capacity-it is very suitable for installation in places with high requirements for paving landscape. The system can be used with almost all ground paving materials and has good load-bearing performance. The slot drainage system is a modular integrated drainage system composed of steel slot cover, resin concrete drainage ditch base, drop well, inspection port and system accessories.
● Drainage ditch body: resin concrete finished drainage ditch;
● Cover type: stainless steel slot cover (side seam/middle seam);
● Gap height: conventional 80-200mm, can also be determined according to the thickness of the on-site paving material;
● (Note: the cover and ditch base can be customized according to customer needs)
The finished slot drainage ditch is a system. Simply put, it is a series of products prefabricated in the factory, including drains and sinking wells of different sizes, which can be directly combined like building blocks during on-site construction.
The gap-type cover is made of 304 stainless steel. After installation, only a gap of less than two centimeters will be left. The paving effect is relatively hidden and beautiful. The linear design gives people a very intuitive sense of simplicity and unity. The linear continuous water interception and drainage efficiency are extremely high. In addition, the cover of this finished drainage ditch can also choose single seam, double seam, and multiple seams. Customers can match it according to the actual situation and the size of the drainage volume. The more gaps, the greater the drainage volume. Because the cover design is novel and practical, it is very popular among people. It is the main drainage product chosen for ground paving in many commercial areas, pedestrian streets, and high-end residential areas.
Center-seam stainless steel drain ditch cover Side-seam stainless steel drain ditch cover
The finished resin concrete drain ditch completely abandons the cement component and does not need to add any water. Different levels of aggregates are mixed and reacted through resin to form. The polymer drainage ditch system has the advantages of high strength and light weight. The pressure resistance level of products of the same volume is significantly higher than that of ordinary cement products. Moreover, since the drainage system is fully modularized, it is easier to assemble manually during construction, which reduces costs. The product is impermeable, anti-freezing, and can effectively prevent erosion by various chemicals. It can also be used for a long time under conditions with complex sewage components. It is an environmentally friendly product commonly used in Europe and the United States in modern times, and more and more projects in China are widely using it.
1. High product strength, scientific and reasonable design, greatly reducing the risk of pressure damage;
2. Smooth inner wall, self-cleaning when water flows through, easy to clean and maintain;
3. Convenient and quick installation, greatly reducing labor costs;
4. Simple, neat and uniform linear appearance;
5. Resistant to chemical erosion, impermeable, resistant to ice and melt damage, and long service life;
6. Small construction area, reducing related operating materials;
7. High comprehensive cost performance, an economical and practical product.
● Pedestrian street, commercial street
● Driving area for medium and small vehicles
● Square, residential area
● Landscape, park
● Municipal engineering, commercial, public buildings
● Schools, outdoor activity areas
●Resin concrete drainage ditch is a modular system with different specifications and can meet the drainage needs of various buildings. Because it is linear and continuous drainage, the drainage volume is better than the ordinary point drainage effect, and there will be no local water accumulation;
●The material of linear drainage ditch is resin concrete, which has the characteristics of light weight, strong anti-aging, anti-freezing and anti-corrosion, strong bearing capacity, smooth surface, and zero permeability;
●The unique design of "V" and "U" shape can effectively increase the drainage capacity and enhance the self-cleaning function;
●Line The linear design gives people a very intuitive linear look and feel, simple and unified, with extremely high efficiency of linear continuous water interception and drainage;
●In terms of installation and maintenance, the construction trenching depth is shallow, the slope is simple, the construction is easy, and the installation and construction speed is fast, which can ensure the construction period;
1. Start trenching
2. Lay cushion
3. Place trench body
4. Install cover plate
5. Grouting reinforcement
6. Surface paving
The following is a general example, everything depends on the site conditions. Correct installation must take into account static and dynamic traffic conditions, select the appropriate load-bearing level, and pass long-term testing and comprehensive fluid mechanics calculations.
The size of the excavated trench must be suitable for the prevention and control of the drainage ditch at this moment and the backfill of the concrete structure of parts H and S as shown in the figure below.
The concrete structure of part H must reach the required height. When the load-bearing grade reaches E600-F900, part H requires 8mm steel bars to make 15cmx-15cm grid structure reinforcement. In this step, it is necessary to design a suitable slope for the water inlet on both sides of the drainage ditch.
Starting from the installation of the outlet, fix the bottom first to facilitate the pouring of concrete on the side. Part S selects the appropriate size according to the design drawing requirements. It is recommended that the finished surface of the drainage ditch is 3-5mm lower than the finished surface of the ground on both sides, and the maximum height shall not exceed the finished surface height of the ground. Install the selected cover in advance to prevent deformation caused by pressure from the concrete structure. Same as the second step, the concrete structure on the side also needs to be reinforced (the load-bearing grade E600 and above needs to be equipped with reinforcement)
If a decorative surface needs to be laid, the decorative surface must be 3-5mm higher than the horizontal surface of the ditch.
1. If you encounter a T-shaped or cross-shaped one during construction, you should make it first, and then place the made T-shaped or cross-shaped one in the required position.
2. If the ditch needs to be strictly waterproof, our company recommends using structural silicone. Clean the position where glue is required before use.
3. During construction, our company recommends placing the cover plate on the ditch first, and then grouting both sides of the ditch.
4. If the drainage ditch needs to withstand horizontal pressure (for example: factory pavement, private parking lot, parking deck), expansion joints need to be left in the horizontal direction. The installation of these expansion joints needs to be strictly in accordance with the standards and cannot be close to the drainage ditch.
5. The ditch is connected to the drainage pipe, and the required holes can be opened from the inside of the ditch to the outside using a hole opener.
6. If a covering is required (such as floor tiles, etc.), make sure that the height of the covering must be higher than the horizontal plane of the trench cover.
7. The grade of the cushion concrete should not be lower than C10, and the concrete grade on both sides of the trench should be the same as the surrounding concrete strength, but should not be lower than C20.
Slot drainage system are very suitable for public places such as commercial plazas, pedestrian streets, and high-end communities. The following figure is a rendering of some of our company's slot drainage ditch cases. Click to view more "Finished Drainage Ditch Cases"
Contact: Chris
Phone: + 86 16624782481
info@manholecoversupply.com
Add: Room B0456, 8th Floor, No. 88 Tangjing Road, Baiyun District, Guangzhou
